Products

NOVATTACH^® Starter Kit

Part # AIOK

This kit contains all the NOVATTACH^® parts to mount any dome camera with a female threaded pendant kit from Unistrut or trusses. All you need to do is add 1.25″ steel EMT or (1.5″ OD aluminum tube). Tubing is available from NOVATTACH^® or through your own sources.   Included with this kit is a universal multi-thread adapter (UMA) that provides 3/4″, 1″ & 1.5″ EMT standard thread sizes.  If you don’t have a pendant cap, try our pendant cap replacement adaptor listed below. Likewise, if you need to mount to a flat overhead surface just add our ceiling plate adaptor. We also have data rack adaptors and box camera adaptors. See our products page for info.

Colour – White (AIOK-W), Black (AIOK-B) or plain metal (AIOK-M)

Electrical Box Adaptor

Part # EBA

This latest addition to the NOVATTACH^®  line of universal device mounting accessories allows NOVATTACH^®  to be installed on a standard 4″ X 4″ electrical box. If your project requires all cable to be inside conduit, this accessory will allow NOVATTACH^®  to integrate with the solution. Like many of our products, the Electrical Box Adapter (EBA) was created to accommodate requests from industry leading technology integrators.

Ceiling Plate Adaptor

Part # CM01

When mounting to a solid overhead surface such as concrete, wood, architectural cladding or steel our ceiling plate attaches   with 4 fasteners / bolts (not included). The NOVATTACH^® mounting system then spins right onto the plate. Available in low profile or higher clearance versions depending upon the conduit type and cabling you are running.

Part # CM01 – 0.5″ clearance under plate to run cables

Part # CM02 – 1″ clearance for running 0.75″ conduit

Data Rack Adapter

Part # DRA

Mounting cameras, wireless access points, or other hardware devices to data racks is now fast and easy with the NOVATTACH^® DRA. Using the standard NOVATTACH^® mounting system, just add this adaptor to the top of the unit. This adaptor hooks onto the cable racking and clamps to the NOVATTACH^® unit. There are no sharp edges and all materials are made of corrosion resistant metals.

Colour – silver

Pendant Mount Adaptor

Part # PMA

When you don’t have a pendant kit available for your dome camera, try the NOVATTACH^® PMA. Attaches to the bottom of the NOVATTACH^® bracket with locking   ring supplied. Material is zinc-plated steel. Colour is silver. Fits most dome cameras and negates the need for unsightly electrical boxes at the bottom of your NOVATTACH^® pendant poles when your camera model doesn’t have a pendant cap.

Box Camera Adapter

Part # FCTA01M

Just attach our tilt / swivel adaptor to the base of the NOVATTACH^® mounting system with the locking ring supplied and you can mount any box camera with or without housing to the NOVATTACH^® units.

Colour – silver

Material – zinc coated steel

Powder Coated Aluminum Tube

Part# EMT

Prices are quoted per foot and sold in one foot increments. We ship 1.5″ OD aluminum tube with all orders, but NOVATTACH^® is compatible with UL approved 1.25″ steel EMT conduit. Aluminum is corrosion resistant, strong, lightweight and easy to cut. When ordering, please use colour codes listed below and indicate the lengths you want for each piece of tubing. For example a 4ft black tube would be EMT-B 4ft. Please specify lengths for all tubes when ordering.

Colour – White (EMT-W), Black (EMT-B) or plain metal (EMT-M)

Material – T6 6061 Aluminum

Large Threaded Adapter

Part# LTA

If using a pendant cap kit with a male thread, this adaptor marries up the NOVATTACH^® mount to the pendant cap. Fast & easy, just spin onto the bottom of the NOVATTACH^® then attach your camera and pendant cap. Used on cameras with pendant caps that have a 1.5″ male thread on top of the pendant cap.

Inside diameter of 1.5″ thread

Colour – Silver

Material – Zinc plated steel

Small Threaded Adapter

Part # STA

If using a pendant cap kit with a male thread, this adaptor marries up the NOVATTACH^® mount to the pendant cap. Fast & easy, just spin onto the bottom of the NOVATTACH^® then attach your camera and pendant cap. Used on cameras with pendant caps that have a 1″ male thread on top of the pendant cap.

Inside diameter of 1″ thread

Colour – Silver

Material – Zinc plated steel

NOVATTACH^® Assembly

Part # NAC

Full assembly service for any of your NOVATTACH^® parts. If you would like your various length NOVATTACH^® products fully assembled, including any adaptors, then this all-inclusive service is for you. Products are shipped fully assembled to your facility. All you have to do is run your patch cable and attach the hardware. Assembled kits are available in White, Black or Silver. Custom colours available upon request. Just pick your parts, colours, pipe lengths and add adaptors and we do the rest.